Saxon hot water system review

You have an old Saxon hot water system in your home. It is no longer working properly. It leaks water from its inner tank and needs to be replaced. You may not be able to repair it, and it may be impossible to replace it with a new one. This is because the inner tank is rusted and the electrical connections are broken. If you are facing this situation, you should know that you cannot replace your Saxon hot water heater with another one.

Saxon SolarStar

Saxon SolarStar hot water heaters are environmentally friendly, low-cost, and reliable. They heat water by capturing heat energy from the air and use that energy to create hot water. Not only do these heaters save energy, they’re also easy to install and service. These water heaters make a great alternative to electric and solar water heaters. Here are some of the most common problems that occur with these units.

There are two primary causes of leaks in a Saxon hot water system. Either the HPNR valve has failed or there is a pin hole in the internal copper coil. The HPNR valve is the easiest to replace, but there are other causes, too. To determine if your Saxon hot water heater is at fault, first check for a leak. If the valve is leaking water, it may be due to a valve failure. If the valve is functioning properly, the system is still functional.

Saxon SolarStar hot water heaters are no longer manufactured. If your unit is more than three years old, it may not function as well as it did in its prime. If it does, you can replace it with a Saxon 125-litre electric hot water heater. However, if you connect a Saxon hot water heater to a bore water supply, the warranty may be voided. Additionally, you should check the VENT PIPE regularly to make sure it is not blocked and causing hot water to escape into the air. Plumbing connections to a Saxon SolarStar hot water heater should follow local authority regulations. For example, you may need to install line strainers. And always connect compression fittings to the water source.

How to fix Saxon hot water problems

There are many ways to detect a leak in a Saxon Condensing hot water heater. You can check for a pin hole on the internal copper coil or a problem with the HPNR valve. The easiest way to determine which problem is causing the leak is to replace the HPNR valve. However, if the valve leaks, the problem is usually with the valve itself. Here are some things to look for before calling a plumber.

The coil, which stores heated water, is prone to leaking. This water can enter the storage tank or overflow. This problem can occur at any age but most commonly occurs in the first 10 years. If you suspect that your Saxon has failed, make sure to get it fixed as soon as possible. You can also check for leakages by inspecting the VENT PIPE periodically. When connecting the Saxon heater to the water supply, you must ensure that the piping system complies with local regulations. You may need to install a line strainer if you have a water pressure regulator.

If you are looking for a great hot water heater that’s easy to maintain and install, you should consider the Saxon Condensing model. Peter Sachs Industries manufactures and markets these heaters in Australia. In addition, it is certified to meet safety standards. The company is a trusted source of hot water heaters in Australia. It is also backed by a warranty. Its ABN is 69 010 792 051.

Replacing Your Saxon Hot Water Systems 

If you own a Saxon hot water heater, you probably know that it is no joke. Oftentimes, the unit will run out of hot water or leak. If this is the case, you can either get it repaired or replace it with a different model that does provide hot water. There are many other issues with a Saxon hot water heater, including a malfunctioning heat exchanger and a leaking tank.

Saxon hot water systems were widely available across Australia and were a popular option for homeowners in Queensland and Northern New South Wales. Even though the company stopped production in June 2011, many Saxon hot water systems remain in use across Australia. The units used in Saxon systems ranged from ninety litres to 400 litres. The company is now a hot water specialist in Brisbane, and you can find a replacement for your Saxon hot water heater by contacting KMS.

The first step in repairing a Saxon hot water system is to isolate the power to the tank. This can be done by turning the isolation valve on the cold-water line that leads to the Saxon hot water heater. This valve will typically be located on the wall. Turn the valve clockwise until it stops leaking and you’ll be ready for a plumber to come and inspect the unit. Alternatively, you can simply turn the tap on and off to test the water pressure. But remember, if the water leaks, you need to isolate the power supply to the tank so that the plumber can do the necessary work. Call 07 3269 1477 to book a service call.